INFINIX SMART 4 X653C FACTORY SIGNED FIRMWARE FLASH FILE DOWNLOAD NOW 100% TESTED WORK

Steps to Flash Infinix Hot 8 Firmware

·         If you haven’t downloaded Infinix Hot 8 factory firmware already, simply download from the above links.

·         Download Infinix Hot 8 DA file, check the link below.

·         Now extract the downloaded Infinix Hot 8 Stock ROM to a folder on your desktop or anywhere you want it.

·         Launch SP flash tool and replace MTK_ALLinOne_DA.bin with the Hot 8 DA file you downloaded in the download agent section.

·         If you’re using aftersales flash tool, open the installation folder and Replace MTK_Allinone_Da.bin with Hot 8 custom DA file.

·         Now, load Hot 8 scatter file into the flash tool.

·         Once the component files has been loaded into the flash tool, set the download option to download only.

·         Now, click on the start button to commence the flashing process.

·         Power off your device and connect to the PC via USB cable.

·         If vcom drivers are properly installed, SPFT /AfterSale tool will detect your device and being a download process on screen.

·         Do not interrupt this download process for any reason.

·         Once the download process is complete, you’ll get a green circle pop-up on the screen/ok.

·         You can now disconnect your device from PC/laptop and power on.

·         The first boot might take a while, it’s nothing to worry about. It should take around 5-10minutes, so don’t panic.